JB INDUSTRIES, INC.

A31484 1/4" Mpt half union (5) | Features internal braze cups for dip tube applications | Resistant to oils, alkalites, and diluted mineral acids Sold by EA

A32004 The 1/4" valve core remover comes complete with hollow handle for storing the 6 extra valve cores | Made in the USA Sold by EA

A31999 Max 800 psi and 220F | The 1/4" valve core is made in USA Sold by EA

A31004 Use with Sil-phos alloy and copper fittings | Install through the side of the larger line to extend length approximately 2" | Includes a cap and valve core | Copper tube extension is 1/4� OD x 3/16� ID | Made in the USA Sold by EA

A31003 Use with Sil-phos alloy and copper fittings | Install through the side of the larger line to extend length approximately 2" | Includes a cap and valve core | Copper tube extension is 3/16� OD x 1/8� ID | Made in the USA Sold by EA

A31005 Use with Sil-phos alloy and copper fittings | Install through the side of the larger line to extend length approximately 2" | Includes a cap and valve core | Copper tube extension is 5/16" OD x 1/4" ID | Made in the USA Sold by EA

A31851 Add multiple ports with just a single fitting | Highest level of brass consisting of 65% copper and 35% zinc Sold by EA

A31852 Add multiple ports with just a single fitting | Highest level of brass consisting of 65% copper and 35% zinc Sold by EA

NFT5-4 Made in the USA | Highest level of brass consisting of 65% copper and 35% zinc | High tensile strength while resisting corrosion | O-ring seal cap Sold by EA

DVO-24 Non detergent | Hydro processed rendering the oil extremely refined, more viscous, and more stable | Resistant to contaminants in extreme temperatures | Made in the USA Sold by EA

A31006 Use with Sil-phos alloy and copper fittings | Install through the side of the larger line to extend length approximately 2" | Includes a cap and valve core | Copper tube extension is 3/8� OD x 5/16� ID | Made in the USA Sold by EA

A31854 1/4" access valve | Swivel tee without depressor, 1/4" FE SAE swivel nut on branch | Includes one cap and valve core per fitting Sold by EA

29435 Gauge scales come in case with hose and hook up fittings Sold by EA

M2-5 Features full flow design for faster evacuating/charging | Features angled bar for better knuckle clearance in rotating hand wheels Sold by EA

DV-200N Intake port is 1/2" x 1/4" x 3/8" | American made Platinum 7 CFM 2-stage vacuum pump | Check valve prevents oil backflow during power failure | Low profile rocker switch | All metal construction including all brass fittings | Fully rebuildable/repairable | Gas ballast keeps oil cleaner to extend pump life | Made in the USA | Two-stage direct drive, 15 micron vacuum rating | Warranty 24 months Sold by EA

A32500N Designed to valve off the system to remove valve cores | Features quarter-turn ball valve shut off fitting, and o-ring seals Sold by EA

CCLV-60 Ball valve 6" whip end opens to full flow | Kobra high pressure hoses are made from Kevlar Sold by EA

CCLE-60 1/4" x 60" high pressure Kobra charging hose set | 800 psi working and 4,000 psi burst | Includes Blue, Red and Yellow hoses | Made in the USA Sold by EA

33112N Can use with existing charging hose | Immediately traps refrigerant discharge from hose when disconnecting from access fitting | Made in the USA Sold by EA

33113N Can use with existing charging hose | Immediately traps refrigerant discharge from hose when disconnecting from access fitting Sold by EA

CCLS-60 American made high pressure Kobra CCLS charging hose set with secure seal fitting | Rated for 800 working psi and 4000 burst psi | Includes blue, red and yellow hoses | CCLS secure seal hoses are UL recognized for use with R-410A | Made in the USA | Fully rebuildable/repairable | CCLS Secure Seal hoses are UL Recognized for use with R-410A Sold by EA

DVO-1 Non-detergent | Hydro processed going through a series of catalytic steps rendering the oil extremely refined | Resistant to contaminants in extreme temperatures | Made in the USA Sold by EA

A31999-25 Max 800 psi and 220 F | The 1/4" valve core is made in the USA Sold by EA

DV-22N Saves last vacuum readout after shut down | Low battery indicator alerts for replacing 9-volt battery that is not included | Powers off after 10 minutes of no use to preserve battery life | Leak-proof with o-ring coupler to ensure proper register of vacuum | Digital display with solid state circuitry automatically adjusts for fluctuating temperature | NIST traceable Sold by EA