FROST PRODUCTS LTD

165. Roll dispenser will only dispense its reserve second roll after the first roll is empty.� This insures that the custodian is replacing empty rolls only and not having to deal with two half empty rolls during maintenance rounds. Comes with keyed tumbler lock to reduce pilferage and vandalism. Front loading for easy service and maintenance. Rollers are non removable without keyed access. Welded construction of both 18 and 20 gauge stainless steel.

708A. Dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions and antiseptic soaps.

975R. Compact flip up shower seat retracts out of way when not in use.� One piece phenolic top, 1/2" thick.�Unit frame is fabricated from 1" O.D. 18 gauge brushed finish type 304 stainless steel. Welded construction, features full 360 degree welds on all joints.�Support and flanges are also stainless steel with brushed finish.

1136S. Stainless steel soap dish. Screw concealed mounting system: mounting bracket is attached to the wall with screws at the desired height. The unit is then hooked onto the bracket. When the set screw is tightened the product is firmly secured to the wall. The set screw applies pressure to an inclined surface on the bracket this provides a rattle free and integral mounting of the product. (mounting bracket and screws provided).

608-1-0.25. The surface mounted vendor line provides easy flexible mounting on any type of wall material or construction. All welded stainless steel construction, 20 & 22 gauge type 304 No. 4 brushed finish. Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks. All units have removable coin box with tumbler lock keyed different from door 25 cent vending. Insert opening: 10"L x 4-1/2"D x 1-1/2"H

1001SP42. Grab bars are of an all stainless steel construction. Snap flange is 12 gauge stainless with a full 360 degree bead weld to the 18 gauge stainless tubing. Features concealed mounting. Please Note: Grab bars are no stronger than the anchors and walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended. Frost grab bars are ADA complaint and if properly installed can support loads of 900lbs.

712. Ideal for all types of vanity and countertop mounting. Less than 5 lbs. of force required to activate pump. Chrome plated brass housing. Concealed mounting assembly. Soap can be top loaded. 4" spout.

972. Compact flip up shower seat retracts out of way when not in use. One piece phenolic top, 5/16" thick. Unit frame is fabricated from 1" O.D. 18 gauge brushed finish type 304 stainless steel. Welded construction features full 360 degree welds on all joints. Support and flanges are also stainless steel with brushed finish. 450Lb. weight capacity.

711. Clean low profile configuration allows for flexible integration with many custom design layouts. Easy refill at top. Keyed lock filler cap. All mounting screws concealed. Drawn and welded construction of 20 gauge stainless steel. Lucite soap level indicator window.

326. Frost Wall Mounted Stainless Steel Waste Receptacle, 11 Gallon, 326Stainless steel construction of�waste bin�is best suited for high traffic areas.�Garbage can�is completely removable for convenient maintenance.�Comes with standard bag holder apparatus.�Code 327 provides extra large waste capacity.�All stainless welded construction.

316. Frost Free Standing Three Stream Recycling Station, Blue and Gray Finish, 316Code 316 recycling container allows for flexible mounting locations in areas requiring three streams. Anchors are included to secure the Code 316 in both indoor and outdoor installations. Adjustable feet on code 316 allow for easy leveling. Flexible labeling kit accommodates specific separation requirements. Ergonomic front loading door reduces risk of back injury. Inclined top discourages use as a table or...

All stainless steel construction of 22 gauge type 304 no. 4 brushed finish.�Full length stainless steel piano hinge on door.�One piece frame on recessed unit with rigid 1/4" return on sides.

710A. Dispenses liquid soap at 10-20% solution as well as more viscous synthetic detergents, lotions and antiseptic soaps.

622. Economical surface mounted unit provides flexible mounting and ease of maintenance for partition panel systems or any type of wall construction. Pivoting self closing lid. French/English napkin disposal label is embossed on lid.

1119. Frost Stainless Steel Wet Floor SignStainless steel wet floor stign is ideal for outdoor areas and high traffic locations that require high quallity furnishings. Heavy sturdy design prevents being knocked over or blown away. Type 304 Stainless Steel construction. Rubber extrusion on handle and feet to prevent slipping. Silk screen graphics, easy open/close and fold for storage. Caution in 3 languages (English, Spanish and French).

107. The�paper towel dispenser�opening will dispense multifold and C-fold towels. Towel opening has rolled safety edge. Includes keyed tumbler lock to reduce pilferage and vandalism. Front loading for easy service and maintenance.

146. Ideal for areas requiring a heavy duty economical dispenser. Tension springs restrict paper consumption to prevent free wheeling of roll. Toilet paper holder has concealed self locking device to prevent pilferage and vandalism. Front loading for easy service and maintenance. All welded construction of 18 gauge steel. Pivot arms hinged on hardened steel rivets. Tension springs reduce paper consumption and stops free wheeling. All surfaces finished in polished chrome.

Ideal for areas requiring a heavy duty economical dispenser. Tension springs restrict paper consumption to prevent free wheeling of roll. Toilet paper holder has concealed self locking device to prevent pilferage and vandalism. Front loading for easy service and maintenance. All welded construction of 18 gauge steel. Pivot arms hinged on hardened steel rivets. Tension springs reduce paper consumption and stops free wheeling. All surfaces finished in polished chrome.

327. Frost Wall Mounted Stainless Steel Waste Receptacle, 15 Gallon, 327Stainless steel construction of�waste bin�is best suited for high traffic areas.�Garbage can�is completely removable for convenient maintenance.�Comes with standard bag holder apparatus.�Code 327 provides extra large waste capacity.�All stainless welded construction.

310S. Frost Round Open Top Stainless Steel Waste Receptacle, 32 Gallon, 310SThis free standing waste�container is ideal for high traffic areas requiring the quality and durability of an all stainless unit without the commitment of wall mounting. The 310 offers clean geometric design lines with radius corners, ideal for lobbies and reception areas. Garbage can is all stainless steel construction, number 4 brushed finish. Spun 18 ga. type 304 stainless steel top. One piece roll formed 22 gauge...

608-1. The surface mounted vendor line provides easy flexible mounting on any type of wall material or construction. All welded stainless steel construction, 20 & 22 gauge type 304 No. 4 brushed finish. Door hinged with full length stainless steel piano hinges and secured with two tumbler keyed locks. All units have removable coin box with tumbler lock keyed different from door. Free vending. Insert opening: 10"L x 4-1/2"D x 1-1/2"H

1001SP36. Grab bars are of an all stainless steel construction. Snap flange is 12 gauge stainless with a full 360 degree bead weld to the 18 gauge stainless tubing. Features concealed mounting. Please Note: Grab bars are no stronger than the anchors and walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended. Frost grab bars are ADA complaint and if properly installed can support loads of 900lbs.