Irwin

4935351 Irwin Vise-Grip GrooveLock Groove Joint PliersSimple push of innovative press-n-slide button adjusts lower jaw 2 times faster than traditional groove joint pliers. Multi-groove ratcheting system has twice the groove positions than any other groove joint pliers, providing precise jaw positioning to grip any type of surface. Anti-pitch, nonslip ProTouch grips provide comfort, control, and less hand fatigue. Right angle teeth grip in all directions for maximum bite. Metal injection...

This item has been discontinued, please shop using the Amazon affiliate link below! You may find this item still available or an alternative. ...

341008 Irwin Speedbor 8-Piece Spade Bit SetBlue-Groove point and cutting edge for faster chip removal. Double cutting spurs scribe the outside of the hole reducing breakout. 10% larger shank for added durability. Grooved hex shank prevents slipping in drill chuck or bit extension. Includes Pro Set case made of molded ABS resin with full-length metal hinge pin. Bit identification is simple with easy-to-read size markings. 6" shank length, 1/4" shank size. Set includes: 3/8", 1/2", 5/8", 3/4",...

357120 Irwin Insert Drywall Screwdriver BitSpecial shock-resistant alloy steel, fully hardened and tempered. For hand and power driving. No. 92047: Size: Phillips #2 Drywall, Length: 1", Shank Diameter: 1/4", Pkg Qty: 1, Package Type: Card No. 3510472C: Size: Phillips #2 Drywall, Length: 1", Shank Diameter: 1/4", Pkg Qty: 2, Package Type: Card No. 351047XC: Size: Phillips #2 Drywall, Length: 1", Shank Diameter: 1/4", Pkg Qty: 10, Package Type: Card No. 357120: Size: Phillips #2 Drywall,...

18 Irwin Vise-Grip Locking C-ClampWide-opening jaws provide greater versatility in clamping a variety of shapes. Adjusts to proper opening by means of end screw and locks onto work by squeeze of hand. Permits user to hold work with 1 hand and apply clamp with other. Small jaw area at contact point ideal for close quarters. Easy release lever in handle to provide maximum locking force. Made of special alloy steel, hardened and tempered. Bright finish. No. 17: Type: Regular, Length: 6 In.,...

22 Irwin Vise-Grip Locking C-ClampWide-opening jaws provide greater versatility in clamping a variety of shapes. Adjusts to proper opening by means of end screw and locks onto work by squeeze of hand. Permits user to hold work with 1 hand and apply clamp with other. Small jaw area at contact point ideal for close quarters. Easy release lever in handle to provide maximum locking force. Made of special alloy steel, hardened and tempered. Bright finish. No. 17: Type: Regular, Length: 6 In.,...

58100 Quick-Grip Spring ClampConstructed of high-tech resin material. Strong, lightweight and rust-resistant. Soft, pliable pads protect fine finishes. Jaw contoured to hold round and odd shaped objects. Ergonomic nonslip handles. No. 58100: Size: 1", Maximum Jaw Capacity: 1", Pkg Qty: 1, Package Type: Hang Tag No. 58200: Size: 2", Maximum Jaw Capacity: 2", Pkg Qty: 1, Package Type: Hang Tag No. 58300: Size: 3", Maximum Jaw Capacity: 3", Pkg Qty: 1, Package Type: Hang Tag ...

58200 Quick-Grip Spring ClampConstructed of high-tech resin material. Strong, lightweight and rust-resistant. Soft, pliable pads protect fine finishes. Jaw contoured to hold round and odd shaped objects. Ergonomic nonslip handles. No. 58100: Size: 1", Maximum Jaw Capacity: 1", Pkg Qty: 1, Package Type: Hang Tag No. 58200: Size: 2", Maximum Jaw Capacity: 2", Pkg Qty: 1, Package Type: Hang Tag No. 58300: Size: 3", Maximum Jaw Capacity: 3", Pkg Qty: 1, Package Type: Hang Tag ...

60147 Irwin 15-Piece Drill Bit Set15-piece set in metal index case includes drill bit sizes 1/16" through 1/2" in 1/32" increments. No. 60147: Pieces In Set: 15 pcs, Pkg Qty: 15, Package Type: Box

58300 Quick-Grip Spring ClampConstructed of high-tech resin material. Strong, lightweight and rust-resistant. Soft, pliable pads protect fine finishes. Jaw contoured to hold round and odd shaped objects. Ergonomic nonslip handles. No. 58100: Size: 1", Maximum Jaw Capacity: 1", Pkg Qty: 1, Package Type: Hang Tag No. 58200: Size: 2", Maximum Jaw Capacity: 2", Pkg Qty: 1, Package Type: Hang Tag No. 58300: Size: 3", Maximum Jaw Capacity: 3", Pkg Qty: 1, Package Type: Hang Tag ...

3043014 Irwin WeldTec Ship Auger BitBits are made stronger and last longer because a harder cutting edge is welded to the base material. 2X nail cutting life compared to standard Irwin ship augers. Patent Pending welded cutting edge for increased durability. Aggressive screw pitch for faster drilling. Wide flutes for maximum chip removal. Quick change impact shank for fast bit changes. Fully forged body on bits 3/4" diameter and larger for durability. Tubed. No. 3043005: Bit Size: 1/2",...

4 Irwin Vise-Grip Locking WrenchUsing proven Vise-Grip technology, this tool locks on 3 sides of a hex head fastener. Tremendous force can be applied without damaging or slipping off the fastener. Helps eliminate rounding of head caused by slippage. Locking wrench adjusts to a range of standard and metric wrench sizes. Wrench has wire cutter and knurled jaw tips. 7", adjusts from 7/16" (11mm) to 3/4" (19mm). No. 4: Maximum Jaw Capacity: Adjusts from 7/16 In. to 3/4 In., Overall Length: 7 In.,...

66510 Irwin STRAIT-LINE Lumber Crayon HolderDurable 6" metal holder. For use on oily, slick, wet, or dry surfaces. Ideal for lumber, concrete, ceramics, rubber, metal, paper, and cardboard. Nontoxic, lead-free. Weather and fade-resistant marks. No. 66510: Pkg Qty: 1, Package Type: Card

1602L3 Irwin Vise-Grip The Original Locking PliersIdeal for tightening, clamping, twisting and turning. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Hardened teeth are designed to grip from any angle. Classic trigger release designed to provide maximum locking force. No. 302L3: Type: Straight Jaw, Length: 7 In., Maximum Jaw Capacity: 1-5/16 In., Wire Cutter: No, Pkg Qty:...

12436 Irwin Hanson Adjustable Guide Die StockAdjustable die stock that maintains alignment for straight and accurate threading. Easily locks in position with set screw. For hexagon dies. No. 12026: Type: Adjustable, Size: 1", Pkg Qty: 1, Package Type: Card No. 12436: Type: Adjustable, Size: 1-7/16", Pkg Qty: 1, Package Type: Box

1002L3 Irwin Vise-Grip The Original Locking PliersIdeal for tightening, clamping, twisting and turning. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Hardened teeth are designed to grip from any angle. Classic trigger release designed to provide maximum locking force. No. 302L3: Type: Straight Jaw, Length: 7 In., Maximum Jaw Capacity: 1-5/16 In., Wire Cutter: No, Pkg Qty:...

This item has been discontinued, please shop using the Amazon affiliate link below! You may find this item still available or an alternative.

322029 Irwin SDS-Plus Rotary Hammer BitFits all SDS-Plus and Hilti TE-C rotary hammers. Reduced area above the flute prevents the drill bit from binding while drilling. The full usable flute length can be utilized. Chrome vanadium shaft through-hardened to 50-53 HrC. Patented tip and flute design removes dust more efficiently, up to 25% faster than other bits. Shot-peened, double-tempered finish reduces breakage. Hot isostatically pressed to extend life and resist breakage. Copper braze...

1882785 Wood CountersinkTapered drill bits with widened flutes for drilling fast, clean pilot holes. Adjustable 4-cutter counterbore cuts and clears chips quicker for fast, smooth countersink or counterbore drilling. Attaches and adjusts with 2 hex screws. Counterbore attaches to flat on shank for a more secure fit. Adjustable stop collar attaches to counterbore for controlling countersink depth. 1/4" hex quick change shank reduces slipping in standard chucks and is compatible with impact...

1882786 Wood Countersink Replacement BitReplacement tapered drill bits with widened flutes for drilling fast, clean pilot holes. Adjustable 4-cutter counterbore cuts and clears chips quicker for fast, smooth countersink or counterbore drilling. Attaches and adjusts with 2 hex screws. Counterbore attaches to flat on shank for a more secure fit. Adjustable stop collar attaches to counterbore for controlling countersink depth. 1/4" hex quick change shank reduces slipping in standard chucks and is...

1882787 Wood Countersink Replacement BitReplacement tapered drill bits with widened flutes for drilling fast, clean pilot holes. Adjustable 4-cutter counterbore cuts and clears chips quicker for fast, smooth countersink or counterbore drilling. Attaches and adjusts with 2 hex screws. Counterbore attaches to flat on shank for a more secure fit. Adjustable stop collar attaches to counterbore for controlling countersink depth. 1/4" hex quick change shank reduces slipping in standard chucks and is...

1837398. Impact insert bits are engineered for maximum durability and long life with impact drivers. Precise fit which reduces stripping and increases the life of the bit. Manufactured with heavy-duty, cold-forged, high grade steel to withstand high torque output. Black oxide finish resists corrosion and increases life of bit. No. 1837371: Size: Phillips #2 Drywall, Length: 1", Shank Diameter: 1/4", Pkg Qty: 1, Package Type: Card No. 1837398: Size: TORX T10, Length: 1", Shank Diameter: 1/4",...

1882788 Wood Countersink Replacement BitReplacement tapered drill bits with widened flutes for drilling fast, clean pilot holes. Adjustable 4-cutter counterbore cuts and clears chips quicker for fast, smooth countersink or counterbore drilling. Attaches and adjusts with 2 hex screws. Counterbore attaches to flat on shank for a more secure fit. Adjustable stop collar attaches to counterbore for controlling countersink depth. 1/4" hex quick change shank reduces slipping in standard chucks and is...

1837400. Impact insert bits are engineered for maximum durability and long life with impact drivers. Precise fit which reduces stripping and increases the life of the bit. Manufactured with heavy-duty, cold-forged, high grade steel to withstand high torque output. Black oxide finish resists corrosion and increases life of bit. No. 1837371: Size: Phillips #2 Drywall, Length: 1", Shank Diameter: 1/4", Pkg Qty: 1, Package Type: Card No. 1837398: Size: TORX T10, Length: 1", Shank Diameter: 1/4",...