Malco Products

NHP1R. Redline nail hole punches offer a generous 5/32" x 3/4" (4.0mm to 19.1mm) horizontal slot for adding or elongating nail holes in vinyl and .019" (.48mm) aluminum siding to accommodate irregular spacing. Ergonomic handles with unique 1-hand operation latch. 5/8" (15.9mm) throat depth. No. NHP1R: Throat Depth: 5/8"

JCCR. For notches and drain tabs, Redline J-channel cutters feature compound leverage for easy cutting action. All steel construction and rust-resistant finishes prolong the life of this tool. Ergonomic handles with unique 1-hand operation latch offers maximum compound leverage performance and natural fit and feel. 5/8" (15.9mm) channel capacity. No. JCCR: Material: Steel

S6R Malco Seamer with Forged JawsRedline S6R hand seamer features wide jaws that produce uniform, accurate bends in sheet steel and nonferrous metals with greater control and efficiency. Wider jaws also minimize buckling and bowing of metal. Fewer strokes are required to bend and straighten angles. Designed for all the metal trades, including HVACR installation, roofing and siding applications, and commercial building and remodeling. Jaws are drop forged, high-impact steel. Hardened steel...

S2R Malco Seamer with Forged JawsRedline S6R hand seamer features wide jaws that produce uniform, accurate bends in sheet steel and nonferrous metals with greater control and efficiency. Wider jaws also minimize buckling and bowing of metal. Fewer strokes are required to bend and straighten angles. Designed for all the metal trades, including HVACR installation, roofing and siding applications, and commercial building and remodeling. Jaws are drop forged, high-impact steel. Hardened steel...

S9R Malco Seamer with Cast Zinc JawsMalco hand seamer with die cast zinc jaws are gentle on painted or coated metal surfaces and are ideal for making a clean and accurate bend and seams in aluminum roof flashing, coil stock or fascia. The jaws feature depth graduations 1/4" increments to a maximum 2" bending depth. The jaws are bowed so that they will hold firmly and evenly across the entire width even when engaged on very light material. Durable construction offers long dependable service...

FCFG Fiber Cement Siding Facing GaugeMore accurate and easier to use than homemade wood preacher blocks. Adjustable for precise 5", 6", 7", or 8" exposures. Gauging block easily snaps into desired exposure position without use of tools or fasteners. Easily held with 1 hand while steadying new plank for nailing. May be used with overlap gauge for 1-person application. Tough, long-lasting, weather-resistant nylon material throughout. No. FCFG: Material: Nylon, Pkg Qty: 1, Package Type: Clamshell ...

FCG2 Fiber Cement Siding Overlap GaugeStrong, 1-piece, tempered spring steel construction. Precision ground tip assures gauge will grip behind siding plank. Works with 5/16" (7.94mm) fiber cement siding. 1 person application. 2 gauges support entire length of plank and precisely gauge a standard 1-1/4" (31.75mm) overlap in 1 easy step. No adjustments to vary and nothing to mark. Will not mar finish of prepainted siding. No. FCG2: Material: Steel, Pkg Qty: 2, Package Type: Clamshell ...

SL5 Snap Lock PunchFor vinyl and aluminum siding. 3/8" throat. Raised projection secures siding and skirting to finished trim. No. SL5: Throat Depth: 3/8", Material: Nickel Plated Steel, Pkg Qty: 1, Package Type: Hang Tag

TNP3S Small Trim Nail PunchDrive trim nails into soffit, fascia, and other finishing trim without denting or marring material. All-steel nose and aluminum tail piece directs weight of this punch to the working end when grasping or starting a nail. Pocket size punch is constructed of hardened steel. The tool will hold and install standard 1-1/4" (31.2mm) trim nails. Small size allows easy access to recesses of formed trim pieces. Hex collar prevents rolling when tool is set down....

TNP2S Malco Trim Nail PunchDrive trim nails into soffit, fascia, and other finishing trim without denting or marring material. All steel nose and aluminum tail-piece. Accommodates up to 1-1/4" standard trim nails. Longer, slimmer nose fits into 1/2" J channel. 8" long. No. TNP2S: Material: Steel/Aluminum, Length: 8", Nail Size: Up to 1-1/4", Pkg Qty: 1, Package Type: Card

SRT2 Malco Siding Removal Tool1-piece spring steel construction. 6-1/4" long. Nonslip textured handle grip. Wedge tip of blade under overlapping panel and hook into the back lip of buttlock. Pulling lip downward, slide the tool along length of panel to unlock and expose nail row of panel to be removed. Lock and nail replacement panel into place. Use tool to re-lock overlapping panel. No. SRT2: Material: Steel, Length: 6-1/4", Pkg Qty: 1, Package Type: Hang Tag ...

C5R Malco 5-Blade Downspout CrimperFive-blade crimper makes a double crimp for joining identical size sheet metal pipe and duct or aluminum corrugated downspout. Nickel plated steel. Red vinyl cushion grips. 9-5/8" length. 1-5/8" throat depth. No. C5R: Length: 9-5/8 In., Throat Depth: 1-5/8 In., Material: Nickel-Plated Steel, Pkg Qty: 1, Package Type: Clamshell

SC2 Malco Single Downspout CrimperSingle crimper. Light duty tool without grips. Makes a single crimp for downsizing aluminum downspouts. No. SC2: Length: 8 In., Throat Depth: 1-1/8 In., Material: Nickel-Plated Steel, Pkg Qty: 1, Package Type: Clamshell

M12 Malco Andy Aluminum Handle SnipsLightweight aluminum handles with inlaid steel blades. 1/3 the weight of steel type snips. Aluminum handles have reinforcing ribs for increased strength. Steel blades are electronically heat-treated and tempered for continuous use. Precision ground cutting edges. Blades are resharpenable. Cutting Capacity: Vinyl .055, Aluminum .035, Copper .023, Stainless Steel 26 Ga. = .028, Galvanized Steel 24 ga. = .028, Mild Steel 24 ga = .024. No. M12: Length: 12 In.,...

M14 Malco Andy Aluminum Handle SnipsLightweight aluminum handles with inlaid steel blades. 1/3 the weight of steel type snips. Aluminum handles have reinforcing ribs for increased strength. Steel blades are electronically heat-treated and tempered for continuous use. Precision ground cutting edges. Blades are resharpenable. Cutting Capacity: Vinyl .055, Aluminum .035, Copper .023, Stainless Steel 26 Ga. = .028, Galvanized Steel 24 ga. = .028, Mild Steel 24 ga = .024. No. M12: Length: 12 In.,...

MV12 Malco Andy Combination SnipsAndy combination snip for vinyl. Cut through heavy vinyl siding lockseams and more with ease. The MV12 aluminum handles snip is part of of the legendary Andy Snip line of light-weight snips with the strength of steel. This unique Andy combination snip design features a knife-lie cutting edge to produce a smooth slicing action for easy one-hand operation. Offers optimal blade alignment when making straight cuts or left or right circular cuts in a variety of non-...

MV12RB Malco Andy Snip Replacement BladesReplacement Blades for MV12 Andy Combination Snip for Vinyl. No. MV12RB: Length: 3 In., Material: High Carbon Steel, Style: Straight, Capacity: Non-Ferrous Material, Pkg Qty: 2, Package Type: Card

FBSN1 Malco Radiant Tubing StapleFoamboard staples to be used with FBSN (foamboard) Stapler (available drop ship). 1-1/2 In. and 2-1/2 In. staple to be used to install Radiant Tubing onto 1 In. and 2 In. foamboard. Staples recommended for 3/8 In., 1/2 In. and 5/8 In. radiant tubing. 200 per pack. No. FBSN1: Height: 1-1/2 In., Pkg Qty: 200, Package Type: Clamshell No. FBSN2: Height: 2-1/2 In., Pkg Qty: 200, Package Type: Clamshell

FBSN2 Malco Radiant Tubing StapleFoamboard staples to be used with FBSN (foamboard) Stapler (available drop ship). 1-1/2 In. and 2-1/2 In. staple to be used to install Radiant Tubing onto 1 In. and 2 In. foamboard. Staples recommended for 3/8 In., 1/2 In. and 5/8 In. radiant tubing. 200 per pack. No. FBSN1: Height: 1-1/2 In., Pkg Qty: 200, Package Type: Clamshell No. FBSN2: Height: 2-1/2 In., Pkg Qty: 200, Package Type: Clamshell

TS1 Power Shear AttachmentTurboshear . Heavy-duty, attachment inserts into chuck of 3/8" or 1/2" drills. Cuts straight and to the left, up to 20-gauge galvanized steel. Ideal for cutting in ferrous and nonferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, and ductwork. Offset design keeps both hands away from work surface. No. TS1: Chuck Size: 3/8", 1/2", Cutting Capacity: Up to 20 ga, Pkg Qty: 1, Package Type: Clamshell

TSHD Heavy-Duty Power Shear AttachmentHeavy-duty Turboshear . Heavy-duty, attachment inserts into chuck of 3/8" or 1/2" drills. Cuts straight and to the left, up to 20-gauge galvanized steel, also cuts 18-gauge steel. Ideal for cutting in ferrous and nonferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, and ductwork. Offset design keeps both hands away from work surface. Also makes angled crosscuts through profiles of metal building panels and stone-coated metal shingles....

TS1RB Turbo Shear Replacement Shear BladeReplacement shear blade for TS1 Turboshear. No. TS1RB: For Use With: TS1 Turboshear, Pkg Qty: 1, Package Type: Clamshell

TSHDRB Turbo Shear HD Replacement Shear BladeHeavy-duty replacement blade for TSHD Turboshear. No. TSHDRB: For Use With: TSHD Tuboshear, Pkg Qty: 1, Package Type: Clamshell